home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Gold Medal Software 3
/
Gold Medal Software - Volume 3 (Gold Medal) (1994).iso
/
comms
/
hs_inst3.arj
/
HS-145A.ARJ
/
HS-145A.DOC
next >
Wrap
Text File
|
1991-10-30
|
4KB
|
99 lines
INSTALLING HS/LINK EXTERNAL PROTOCOL
IN PCBOARD 14.5A (BETAS DATED 10/30/91)
Please refer to the PCBOARD manual and change HISTORY for detailed
information on installation of external protocols. This
information was tested with HSLINK betas posted on 10/30/91 and
PCBOARD 14.5A betas posted on 10/30/91.
The following installation steps should work for most folks:
Copy the provided PCBSH.BAT and PCNRH.BAT files into your \PCB
system directory. On a multi-node system, copy these files into
the \PCB directory for each node. Copy HSLINK.EXE into directory
included in your search PATH.
You can edit PCBSH.BAT and PCBRH.BAT to include options on the
HSLINK command line, but most folks won't need to change anything.
If your system can't keep up with the COM port while accessing the
disk drive, you may want to add -HS to the command line in each
file. If you want to experiment, there are a number of optional
parameters you can read about in HSLINK.DOC and HSLINK.NEW.
Contents of PCBSH.BAT
---------------------
echo off
if exist pcberr.fil del pcberr.fil
if exist %DSZLOG% del %DSZLOG%
hslink -hs -p%1 -e%5 -u%6 %3
|
+---- this was added if you need slow handshake
Contents of PCBRH.BAT
---------------------
echo off
if exist pcberr.fil del pcberr.fil
if exist %DSZLOG% del %DSZLOG%
hslink -hs -p%1 -e%5 -u%6
|
+---- this was added if you need slow handshake
Next you need to install the HS/LINK protocol into the PCBOARD
protocol menu. There are two ways to do this.
The easiest is to edit your \PCB\GEN\PCBPROT.DAT file in text
editor and add the following line:
H,B,1024,HS/Link (bidirectional batch),N,N,Y
If you prefer to use PCBSETUP, the following steps will give the
same result.
Load up PCBSETUP and press C to access the FILE LOCATIONS 2 screen.
Then cursor down to the PROTOCOL DATA FILE and press F2.
In this screen you press ALT-I to insert a new protocol.
When asked for "USE" enter "H".
When asked for "TYPE" enter "B".
When asked for "SIZE" enter "1024".
When asked for "MNP" enter "N".
When asked for "PORT OPEN" enter "N".
When asked for "LOCK LINES" enter "Y".
You should see the protocol defined like this:
╔════════════════════════════════════════════════════════════════════╗
║ PCBoard Setup Utility ║
║ Edit Protocol File ║
║ ║
║ Port Lock ║
║ Use Type Size MNP Open Lines Protocol Description ▒
║ ═══ ════ ════ ═══ ════ ═════ ═════════════════════════════════════ ▒
║ H B 1024 N N Y HS/Link (bidirectional batch) ▒
║ ║
Press ESC to exit this screen.
When asked "SAVE CHANGES" press "Y" and ENTER.
Press ESC two more times to exit the setup program.
When asked "SAVE Y/N/Q/A" press "Q" and ENTER.
I hope these instructions help, but remember, I can't take
responsibility for anydamages resulting from these instructions. If you
get stuck, it always helps to read the DOC files that come with PCBOARD
and with HSLINK. If all else fails, call up the tool shop and ask for
help on the main board. Either I will help you, or somebody else will
know the answer and give you a hand.
Good luck!
Samuel H. Smith
Sysop of The Tool Shop
Phone number Modem type Access
-------------- --------------------- -------------------
(818) 891-3772 US Robotics HST 9600 Contributors only
(818) 891-1344 Hayes-V series 9600 Contributors only
(818) 891-6780 US Robotics 2400 Free to all